Studio 6 Digital iTestMic2.
Spesifikasjoner:
Audio
Output
iOS Device Charging
Microphone
Compatibility:
Technical Information
The dual-gain range mic preamp, A/D converters, D/A converters and USB digital audio interface are all contained within the mic itself, so no Apple analog electronics are used. This lets us bypass the heavy filtering and compression that are normally in use, and also to store calibration values that are read by software.
iTestMic2 is equivalent to having a pro Type 2-class test & measurement mic, low-noise matched preamp with two fixed gain ranges, A/D converter, DAC, and USB digital audio interface, all combined in one portable device.
iTestMic2 meets ANSI / ISO Type 2 specifications for frequency response, linearity, and directional characteristics. We do not guarantee that this microphone can meet the strict environmental requirements of Type 2 or Type 1.
OBS: Husk KM21700 gjengeadapter.
Link til Audiotools App Software
Spesifikasjoner:
Audio
- 20Hz - 20kHz +/- 3dB
- Omnidirectional pattern
- Free-field response
- 26 dBA - 120 dBA performance in two ranges; 26-96 dBA, and 48-120 dBA (typical)
- NC Limit: Below NC29
- Two gain ranges, 26-104 dBA, and 49-120 dBA
- Mono input signal, present at both Left and Right iOS device input channels
Output
- 3.5mm (1/8") stereo analog output jack (full volume level)
- Low-distortion output
iOS Device Charging
- 1.3mm 5.0V charging input jack supplies up to 2.1A @5V to iOS devices
- Requires 3.5A 5V pin+ power adapter (included)
Microphone
- Excellent immunity to cell phone RF noise
- Factory calibration stored internally, calibrated with a NIST-tracable 94.0 dB pressure-compensated calibrator
- 1/2" nominal size, fits all standard calibrators
- Consumes less than 90ma in use
- 1.0m (37) Lightning cable length
Compatibility:
- iPhone 5, 5C, 5S, 6, 6s Plus, 7 Plus, 8, 8 Plus, 9, X, XS, XS Max, XR
- iPad Mini 2
- iPad Air
- iPad Pro
- iPod Touch 5th & 6th generation
Technical Information
The dual-gain range mic preamp, A/D converters, D/A converters and USB digital audio interface are all contained within the mic itself, so no Apple analog electronics are used. This lets us bypass the heavy filtering and compression that are normally in use, and also to store calibration values that are read by software.
iTestMic2 is equivalent to having a pro Type 2-class test & measurement mic, low-noise matched preamp with two fixed gain ranges, A/D converter, DAC, and USB digital audio interface, all combined in one portable device.
iTestMic2 meets ANSI / ISO Type 2 specifications for frequency response, linearity, and directional characteristics. We do not guarantee that this microphone can meet the strict environmental requirements of Type 2 or Type 1.
OBS: Husk KM21700 gjengeadapter.
Link til Audiotools App Software
