| Output power Single Ended: | 4 x 80watts / 4 ohm nominal load |
|---|---|
| Output power Bridged Mode: | 2 x 160 watts / 8 ohm (THD+N* = 0.1% typ) |
| Total Harmonic Distortion + noise: | 0,015% |
| Frequency response: | 20Hz to 20kHz 0dB/-3dB |
| Signal to noise Ratio: | (A-Weighted) 102 dB |
| High-pass filter: | 2nd order 12dB per octave 30, 160 Hz switchable |
| Dynamic range: | 102dB |
| Input impedance: | 10kohm |
| Maximum input: | +22dBu |
| Sensitive input range: | -22dBu / -5dBu |
| Switchable Input Amplification Stage: | -8dBu to +5dBu |
| Remote level control: | Attenuate 256 steps (Optional VCA panels available for remote level control) |
| RS485 serial interface: | to connect up to 255 amplifier units to external control systems for status monitoring and volume control for each channel |
| AC Mains Supply: | 230Vac ±10% 50Hz |
| Power supply: | PFM switching mode with PFC controller |
| Power supply operating frequency: | 40kHz |
| Fan cooling: | Temperature controlled, variable three steps fan speed |
| Fault flag out (Remote fault reporting): | 2x open collectors, 2x free-use contacts |
| Size: | 44mm. (H) x 216mm.(W) x 208mm (D) |
| Case: | Half single 19 rack unit fully compatible with the InOut RM30 and FP30 rack accessories. |
| Weight: | 1.80 Kg |
| Color: | Custom InOut Dark Blue |
