Multi interface fra TOA.
- (*1) 0 dB = 1 V, (*2) 0 dB = 0.775 V
| Power Source | 230 V AC, 50/60 Hz |
|---|---|
| Power Consumption | 19 W (180 mA) (at rated), 24 W (230 mA) (max.) |
| Audio Input (*3) | Input: 2 inputs (2 P/input), Max. 0 dB (*1), 600 ? or less, balanced, with a semi-fixed volume for adjustment (0 to -25 dB) Control: 2 inputs (2 P/input), no-voltage make contact input, open voltage: 12 V DC, short-circuit current: 10 mA Removable terminal block (8 pins) |
| Audio Output (*3) | Output: 2 outputs (2 P/output), Max. 0 dB (*1), 600 ? or less, balanced Control: 2 outputs (2 P/output), relay contact output, contact capacity: 24 V DC/0.5 A Removable terminal block (8 pins) |
| Contact Input (*3) | 16 inputs, no-voltage make contact input, open voltage: 12 V DC, short-circuit current: 10 mA, removable terminal block (18 pins) |
| Contact Output (*3) | 16 outputs, relay contact output, contact capacity: 24 V DC/0.5 A, removable terminal block (18 pins) |
| PBX I/F (*3) | PBX input and output: 2 channels, Max.: 0 dB (*2) or less, Average: -15 dB (*2) or less, 600 ?, balanced, mini-clamp connector (2 pins), with adjustment functions for both input and output (Input: 0 to +15 dB, Output: -15 to 0 dB), Analog E & M interface |
| Tie-line I/F (*3) | Tie-line input and output: 2 channels, Max.: 0 dB (*2) or less, Average: -15 dB (*2) or less, 600 ?, balanced, mini-clamp connector (2 pins) Signal method: EXES-2000/EXES-6000 tie-line method Selective signal: DTMF signal |
| Network Section | Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation) Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP Audio packet transmission system: Unicast, Multicast Number of paging destinations: Unicast (max. 16), Multicast (max. 191) Connector: RJ45 connector Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software) Quantifying bit number: 16-bit Voice encoding method: Sub-band ADPCM, Cryptosystem Voice packet loss recovery: Silence insertion Audio delay time: 80 ms, 320 ms (controllable on the software) |
| Indication | Network LNK/ACT indication, Status lamp, Power-on indication lamp |
| Others | Firmware update function, System registration data entry hold facility, Time of day hold facility, Reset switch (front panel) |
| Installation Method | Rack, Desk, Surface mount |
| Operating Temperature | 0 ? to +40 ? |
| Operating Humidity | 90 %RH or less (no condensation) |
| Finish | Pre-coated steel plate, black, 30 % gloss |
| Dimensions | 420 (W) × 44.3 (H) × 239.5 (D) mm |
| Weight | 2.8 kg |
| Accessory | AC power cord (2 m)
1, CD (for PC setting, maintenance use)
1, Mini-clamp plug (2 pins) 10, Removable terminal plug (8 pins) 2, Removable terminal plug (9 pins) 4, Plastic foot 4, Screw for fitting plastic foot 4, Rack mounting bracket 2, Screw for rack mounting 4, Wall mounting bracket 2, Screw for mounting bracket 8, Screw for wall mounting 4 |
